|
|
ABOUT OUR ON BOARD LAP TIMING SYSTEMS We carry a complete line of on board lap timing systems, both with and without driver displays. Our
timing systems can be used in conjunction with our data acquisition
systems to automatically insert lap times into the software, OR they can be used
separately without
a
data acquisition system. BUYER BEWARE! We only recommend systems that will work dependably on large race tracks with beacons that can reach 120 feet. With many “other” systems the beacon range is only 60 feet, and are sold to racers who end up disappointed in the dependability of the system.
Pictured
above: Hot Lap Mini Dash Display System This
is our most popular system! Double
Extended Range Beacon, 60 Lap memory, .01 accuracy, with recall. This
is a complete lap timing system which includes: 1.
A double extended range trackside beacon. 2.
A small mini dash display that can display lap number and lap times
simultaneously.
For size reference, the dash display is also pictured above mounted in
center of 10” racing wheel. 3.
On car receiver which receives signal from trackside beacon, and holds a
standard 9 Volt battery and on/off switch used to power the system.
4.
Wiring Harness
This is a stand alone system and DOES NOT require any additional
components to operate. Our recommended system Complete $239 Complete system WITHOUT trackside beacon $169 Complete system WITHOUT driver display $209 Complete
system with larger standard display and standard range beacon (not recommended)
$229 For more information see the article below “How to enter lap times into the data acquisition software Battery
for Double Extended Range Beacon:
The Double Extended Range beacon requires a 12 Volt
battery to operate. We offer
a Sealed 12 Volt battery (pictured above) that can fit in your pocket and can be
recharged with a standard 12 Volt battery charger.
This saves your crew the time and energy carrying
a non-sealed acid motorcycle or automotive battery to the pits.
This battery will supply hours of use without recharging. $40 SUPERCHARGE YOUR HOT LAP TIMER!! OUR NEW INTERFACE MODULE will super charge your HOT LAP TIMER! 1. ELIMINATES THE 9 volt BATTERY FOR GOOD! This module get hardwired to your data logger which will power the lap timing system. Low Battery voltage is the #1 reason for poor Hot Lap Performance and dependability! 2. Automatically puts the lap times into your data logger. (works with OR without a data acquisition system) 3. Improves the performance of the Receiver to increase Hot Lap System performance. 4. Eliminates the maintenance item of continuously changing the battery! This Unit pays for itself just in saved battery costs. 5. Complete with instructions and all required harnesses. $85 Note: This is a custom designed module by Advantage Motorsports, and is exclusively available here.
Other
Topics important to Lap Timing Systems! COMMON MYTHS, PROBLEMS, QUESTIONS REGARDING HOT LAP TIMING SYSTEMS How
to enter Lap Times into the Advantage Motorsports Data Acquisition Software Crew or Race Official Qualifying Lap Timer System
|
Send mail to info@advantagemotorsports.com with questions, price quotes, or order info.Copyright Advantage Motorsports 1996 - 2007
|